Prg Mbox Designer User Manual v3.6.1 User Manual download pdf (Page 102)

94 MBOX

MEDIA SERVER USER MANUAL

Inputting MIDI Timecode

MIDI timecode input is achieved through the MIDI In connector on the Auxiliary Input panel. This connector passes

signal to a MIDI/USB adapter, and from there into the Mac computer.

Figure 4-3: Auxiliary Input Panel (v3.4)

Setting Preferences for Timecode Input

The MBOX Remote application is used to set the preferences for incoming timecode. MBOX Remote contains a

Timecode window for this purpose. (To toggle the Timecode window on and off while MBOX Remote is running, press

[ T] on the keyboard.) The preferences include the source type, output options, auto-start preference, and start/end

time values. The Timecode window also provides buttons for start, stop and resume control.

Refer to "Timecode Window" on page 141 for more detailed information.

Guidelines:

+ Since MBOX Remote can retransmit the timecode data via Ethernet, a timecode source can be connected to one

MBOX server and then sync’d to any other connected servers. The servers must be networked together using a

compatible network setup.

+ When using a timecode input, multiple layers on one MBOX server or layers on multiple servers can respond to

the same timecode, but need not have any other layer properties set the same (except the Timecode Sync

playmode, of course).

BALANCED AUDIO OUT

RIGHT

MIDI IN

(COMPOSITE)

Y IN

SDI IN R-Y IN B-Y IN

ETHERNET LEFT

MIDI OUT

SMPTE IN

MIDI

Out

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 173 174

No comments

Prg Mbox Designer User Manual v3.6.1 User Manual Page 102